2014 Mazda 3 2.2 Skyactive-D 150PS

Mazda 3 was created in 2003 to replace Mazda 323. It shows a completely different design from the 323 version, studied in California and reviewed by the Japanese centre. The platform on which it was initially developed was studied by Ford and was also used by Focus, Volvo S40 and V50.

This Japanese car made in Hofu proved to be very successful in Asia and America, while in Europe the big German rivals (VW Golf and Ford Focus) have got the better on sales.

In the second series of Mazda, the 2.2 L MZD-CD engine is also presented in two power versions: 150CV and 185CV.

The third generation (that one at issue) was presented in June 2013, after the separation from Ford, so allowing Mazda to have “free rein” and to design again the car from scratch, thus adopting gasoline and diesel engines directly made “in-house”. The platform was also replaced by a version made by “Skyactive”. All these details convert Mazda 3 into a strong and reliable version with a very appealing design.

Different versions have been manufactured for the third series, which is available in the Gasoline and Diesel variants, also equipped with automatic shifting gearbox:

Model Type Power, torque@rpm
European Models
G100 1,496 cc I4 100 PS (74 kW; 99 bhp), 150 Nm (110 lb·ft)@4000
G120 1,998 cc I4 120 PS (88 kW; 120 bhp), 210 Nm (150 lb·ft)@4000
G120 AT 1,998 cc I4 120 PS (88 kW; 120 bhp), 210 Nm (150 lb·ft)@4000
G165 1,998 cc I4 165 PS (121 kW; 163 bhp), 210 Nm (150 lb·ft)@4000
CD150 2,191 cc I4 diesel 150 PS (110 kW; 150 bhp), 380 Nm (280 lb·ft)@1800
CD150 AT 2,191 cc I4 diesel 150 PS (110 kW; 150 bhp), 380 Nm (280 lb·ft)@1800
Australian Models
Neo, Maxx, Touring 1,998cc I4 114 kW (153 bhp), 200 Nm (150 lb·ft)@4000
SP25, SP25 GT, Astina 2,488 cc I4 138 kW (185 bhp), 250 Nm (180 lb·ft)@3250
Astina diesel 2,191 cc I4 diesel 129 kW (173 bhp), 420 Nm (310 lb·ft)@2000
North American Models
i Sport, i Touring, i Grand Touring 1,998 cc (121.9 cu in) I4 155 bhp (116 kW)@6000, 150 lb·ft (200 Nm)@4000
s Touring, s Grand Touring 2,488 cc (151.8 cu in) I4 184 bhp (137 kW)@5700, 185 lb·ft (251 Nm)@3250

The CD150 Euro 6 Diesel engine with DPF is also shared, in different versions, with the older sisters: Mazda 6 and Mazda CX-5.

Below are some of the main characteristics of Mazda 3

Composition of the Frame and Characteristics of the Skyactive Innovation: following the end of the partnership with Ford, Mazda has focused on the reduction of weights and has introduced innovative solutions, such as the Skyactive frame based on efficiency – a platform with a limited weight that enables to make lighter, stronger and safer vehicles up to (1800Mpa), thus increasing the sporty driving pleasure. The new bodywork weighs 8% less, while the frame 14% less compared to the second series. High-resistance steel materials have been implemented for this bodywork in order to increase sturdiness and reduce weights.

But for the frame, the main target was to combine low- and medium-speed agility with high-speed stability. To do this, the company has developed a new steering system equipped with electric control, and capable of providing an immediate response at low and medium speeds. On the contrary, a quick response of the steering wheel at low speeds could determine an excessive sensitivity of the vehicle in response to small variations of the steering wheel at high speeds. In order to prevent this phenomenon, Mazda engineers have also reviewed the geometry of suspensions.

The frame shape has also been redeveloped: on the front side of the vehicle, the central section has been enlarged and the longitudinal misalignment of the lower arm coupling position has been reduced. At the same time, on the rear side, the longitudinal clearance among the elements of the crossbar has been enlarged and the longitudinal misalignment of the side arm coupling position has been reduced. In addition, welded flanges have been removed on both the front side and rear side to improve the coupling sturdiness of the welded sections. All these details have considerably improved the global sturdiness in a lighter frame.

Sistema i-ELOOP: since 2012 Mazda has been mounting the i-ELOOP system on its Gasoline cars. The i-ELOOP is the first released energy recovery system using a super condenser in place of the battery and being 10% more efficient. In the Mazda i-ELOOP, the super condenser does not only feed the starter motor (in all other versions, that is its only use) but also the conditioning, audio and many other systems, directly storing the energy from the alternator and this translates into a greater accumulation of energy in a quicker way. One of the limits of the AGM battery and all batteries in general is in fact represented by the reduced speed of storage and delivery of energy. Vice-versa, super-capacitors accept much quicker and more numerous cycles. Thanks to this system, Mazda can use a more powerful alternator with a greater voltage range of 12 to 25 Volts to recover a major quantity of kinetic energy. By using the i-ELOOP it is also possible to access the advanced start&stop system, called i-stop, which can extend the engine-off periods, anticipating release times and delaying the restart in the most adverse weather conditions.

Safety systems: in addition to being performing, Mazda 3 is also very safe. In fact, its equipment enables to rectify “distraction errors” during driving. Among the most important are the automatic urban emergency braking system (SCBS), and the vehicle monitoring system (RVM) that reports the presence of vehicles behind or next to your car, including those in the blind spot. The fully equipped version also includes the i-Activsense device that protects against lane departure (LDWS), and enables to maintain the correct safety distance thanks to the adaptive cruise control (MRCC) and finally to always have the correct lighting level thanks to adaptive front lighting (AFS) with automatic headlights turn-on/off depending on traffic (HBC).

Natural Sound Smoother: this system literally “lessens” engine vibrations as it mounts a dynamic shock absorber inside the pin that joins the piston to the rod. It can work in contrast to the engine vibration, thus reducing that tiresome ticking of diesel engines and making it appear as silent as a gasoline engine.

Where to find the control unit?

How to read it:

With the tool KESSv2 and the car/bike activation, family MAZDA DIESEL DENSO RENESAS SH725X MY2015 CAN- 535, it is possible to identify, read and write ECU using the OBD connector.

Control Unit details

Manufacturer: Denso / Model: SH12 / Micro controller: Renesas SH725x

The ECU can be read using the connection via the OBD port:

Let’s now analyse the main maps available in the driver:

The driver developed for this BiTurbo 150Cv 4-cylinder 380 Nm vehicle contains 33 maps.

They divide into:

  • Injection System
  • Turbo
  • Rail
  • Motor Torque

Basic Injection Map

This map is used by the ECU as a calibration as it shows the quantity of fuel injected depending on the number of engine revolutions and pressed pedal %. By increasing these values, the quantity of injected fuel and accordingly the vehicle performance can be increased.

 Fuel Quantity Limiter

This limiter shows the maximum value of fuel that you can inject per every cycle, depending on the number of revolutions. It is worth observing that the highest values correspond to the maximum torque, and this limitation is lower as revolutions increase.

Injection time

This map shows, in microseconds, the injector opening time when a determined quantity of fuel is demanded. It is also expressed as a function of the number of revolutions as the highest the revolutions, the shortest the injector opening time. The highest values are shown in the area with the maximum quantity of fuel and the lower number of revolutions.

 Duty Cycle Variable Geometry

This map shows the percentage of closing of the impeller vanes inside the turbine, in order to maximize the efficiency; the map uses the quantity of fuel injected and the number of revolutions as reference axes: by increasing the quantity of fuel and the number of revolutions, percentages are progressively lower, because the orientable vanes of the impeller will have a major opening.

Turbo pressure

These maps are very important in the diesel engine as they regulate the turbo pressure depending on the quantity of fuel injected and the number of engine revolutions. Values expressed are directly in hPa, this makes it possible to always be aware of the effective pressure managed by the turbine. In this case, higher values are in the area of revolutions showing the maximum torque.

Rail pressure

The map in issue manages pressure inside the rail flute, on the basis of the number of engine revolutions and the quantity of fuel injected. Maximum values reach 1970 bar: this means that injectors mounted on this vehicle are very performing and resistant.

Torque necessary during standard conditions

This map shows the torque demanded by the driver by pressing the accelerator pedal (driver wish). Based on a determined percentage of the accelerator pedal pressed and on a certain number of revolutions, the map expressed Nm values. In this case, we also have negative values since the map also expressed CUT-OFF values.

Maximum Torque Limiter f(APS)

To complete this “set” of maps, let’s examine one of the most important maps of the file analysed: torque limitation, used by the ECU to protect the engine, as the atmospheric pressure changes. Values are expressed in Nm and by increasing values, the full performance of the engine can be unblocked.

L’articolo 2014 Mazda 3 2.2 Skyactive-D 150PS proviene da Alientech News & Blog.