K-Tag Updates

New JCB work vehicles now supported by K-TAG SM (Service Mode)!

Not only cars! New models of marine engines, trucks and work vehicles now supported by K-TAG SM (Service Mode) without opening the ECU! Thanks to the latest K-Suite update, the new ECUs Bosch, Denso, Hitachi, Mitsubishi, Motorola, Siemens and Transtron will be supported.  Become more and more competitive in the chiptuning field! As of today, with K-TAG SM (Service Mode),…

Read more

New models of LCV, motorcycles, marine engines and cars now supported by K-TAG SM (Service Mode)!

New models of LCV, motorcycles, marine engines and cars now supported by K-TAG SM (Service Mode)!

New Ford, Iveco, KTM, Renault, Toyota, Volvo and Volkswagen vehicles, now supported by K-TAG SM (Service Mode): remap them without opening the ECU! Read and write directly on bench the ECUs Bosch EDC17C69, EDC17CP19, EDC17CP20, EDC17CP22, EDC17CP58, EDC17CP65, M17.8.42, ME17.9.21 and ME17.9.53! To use the new SM mode, you will not need to purchase any new hardware, cable or external…

Read more

K-TAG: ECUs Bosch, Denso, Kefico and Mitsubishi now supported!

K-TAG: ECUs Bosch, Denso, Kefico and Mitsubishi now supported!

Through the new K-Suite update, new vehicles of the FCA Group, Kawasaki, Mazda, VAG, Mercedes, UAZ, LAD, GMC, isuzu, Jaguar, Land Rover, Kia and Hyundai will be supported. With the activations Bootloader Tricore, Bootloader Mitsubishi, Tricore Service Mode and JTAG Renesas, it will possible to obtain the complete contents of the ECU allowing, in some cases, the cloning of the…

Read more

New Chevrolet, Opel and Saab vehicles now supported by K-TAG!

New Chevrolet, Opel and Saab vehicles now supported by K-TAG!

The ECUs Delco E39A MPC5566 and E39 MPC5566 are now supported by K-TAG and BAM connection! With the activation of JTAG FREESCALE and the connection method BAM (Bus Access Module), it will be possible to obtain the complete contents of the ECU. The cloning function will allow you to repair the ECU, in case it was blocked or damaged. Thanks…

Read more

Mitsubishi Pajero sport: from today supported by K-TAG!

Mitsubishi Pajero sport: from today supported by K-TAG!

Bootloader Mitsubishi and Tricore Service Mode: new protocols supported by K-TAG! Control units with microcontroller TC1762, TC1793, MH8102F and MH8115F: are now supported! Thanks to this update, the ECUs of off-road vehicle of the Japanese company Mitsubishi Motors, but also the ECUs of some marine engines of the Suzukibrand, will be supported by K-TAG. McLaren, Mercedes with other VAG vehicles,…

Read more

K-TAG: new ECUs Bosch EDC17, ME17, MED17 and MEG17 now supported by TSM!

K-TAG: new ECUs Bosch EDC17, ME17, MED17 and MEG17 now supported by TSM!

Control units with microcontroller TC1724, TC1762, TC1792, TC1796: now supported by K-TAG! With the most recent K-Suite update, it will be possible to work on bench with K-TAG without opening the ECU: remap directly through the connector! If you have an active subscription on K-TAG Master or Slave with Tricore-ST activation, you will access to the new activation TSM (Tricore…

Read more

Alientech greener and greener: Chery Tiggo 7 Turbo, now supported by K-Tag!

Alientech greener and greener: Chery Tiggo 7 Turbo, now supported by K-Tag!

From today the “Green Suv” Tiggo 7 Turbo by Chery, Chinese car manufacturer, is supported by K-Tag! Thanks to the new K-Suite update, you can remap the ECU and, thanks to its cloning function, you can replace the ECU, if damaged! And that’s not all, there is also another important news: we’re now supporting the Automatic Transmission Control Unit of…

Read more

Six new microcontrollers supported, Alientech never stops!

Six new microcontrollers supported, Alientech never stops!

The number of ECUs supported by K-TAG Tricore Service Mode, increases more and more! With the most recent K-Suite update, it’s possible to work on the bench with K-TAG without opening the ECU on control units with microcontrollers TC1724, TC1762, TC1767, TC1793, TC1796 and TC1797. TRICORE SERVICE MODE You won’t have to buy new hardware, cables or adapters! To be…

Read more

K-TAG TRICORE SERVICE MODE: NEW ECU MODELS WITH TC1796 SUPPORTED!

K-TAG TRICORE SERVICE MODE: NEW ECU MODELS WITH TC1796 SUPPORTED!

Don’t open the ECU, read, write and make your backup on the bench, directly through the connector! Thanks to the new K-Suite and K-TAG update, from today you will be able to work on more ECUs Bosch EDC17 and MEDV17 with TC1796. Work safely! K-TAG, the cables supplied and an active subscription, are all you need! If you have an…

Read more